Standard Exhaust Cabinet

Standard Exhaust Cabinet

Standard Smoke Exhaust Cabinet

  • The surface of the body and the steel frame are treated with acid and alkali resistant paint. The door panel is made of 1.2mm steel plate that meets the CNS 6532 flame resistance test. Each finished cabinet needs to be a complete independent unit. All cabinet parts must be processed or painted at the factory, but the finished hardware can be assembled on site.

     

    Introduction

    Body: the shell to be pressed and manufactured with galvanized steel plate 1.2m / m thick, the surface is coated by the powder, lining the thickness of 6mm anti-corrosion solid chemical board.

     

    Door plate:

     

    Using fire-resistant steel plate t = 1.2mm, in line with CNS6532 flame test, the surface is coated by powder.

     

     

    Glass window: Adhesive safety glass 5m / m thick, PP to the window frame and to acid and alkali heat treatment.

     

    Pulley: the use of hanging two-track pulley, can be left or right to move.

     

    Bottom door with ventilation damper.

     

    Lighting: letter mark full-density chamber fluorescent, 220V * 40W in line with CNS requirements, with a button switch.

     

     

    Electrical socket: grounded Japanese system international standard or Toshiba card or exotic strange brand 110V dual port type * 2 group 220V single port type * 2 group.

     

     

    Power: 110V, 220V single three-phase NFB switch.

     

     

    Duct: PP polypropylene, diameter about 12 ".

     

     

    Duct fittings: exhaust pipe with a fixed frame and cable, tight belt and other fixed.

     

     

    Operation mark: SUS # 304 etched engraved version of the motor, lighting, sockets, water supply, etc., operating instructions, individual instructions.

     

     

    Filter: Material activated carbon filter media used PVC / PP frame.

     

     

    Compartment door

     

    Using fire-resistant steel plate t = 1.2mm, in line with CNS6532 flame test, the surface by powder coating.

     

    Glass window: Adhesive safety glass 5m / m thick.

     

    Pulley: the use of hanging two-track pulley, can be any left and right sliding.

     

    Door: no ventilation below the door.

    Email: jjm.tw@jjm.com.tw

    TEL: 886-7-2015968

    FAX: 886-7-3316138

    ©2019 JIN JING MI CO., LTD. All Rights Reserved.